P.O. Box 6004
San Clemente, CA 92674
(949) 425-1362 - Voice
(877) 235-0702 - Fax
E-mail : hobbyclub@earthlink.net

HPI Sprint 2 RTR w/Racing Impreza Body



1/10 Ready To Run HPI Sprint 2 on-road Touring Car with the Impreza Body.**
FEATURES: Chassis: Reinforced molded nylon chassis, upper deck and shock towers**
Drive: Four wheel**
Drive Type: Urethane belt**
Motor: Tornado 17 turn**
Radio: HPI (made by Airtronics) AM TX-2 pistol grip with steering and
throttle trim, dual rate adjustment, charge jack and servo reverse,
standard size servo**
Electronic Speed Control: Hawk Power Reverse**
Full ball bearings: Located in transmission and bell crank, rubber
sealed bearings in wheels, 14 total**
Shocks: Four oil-filled, plastic bodied**
Differentials: Planetary gear type with metal outdrives, sealed**
Transmission: Ball bearing equipped and capable of handling modified
motors down to 10 turns**
Wheels: 6 spoke chrome 1" (26mm) wide, 2" (51mm) diameter, 6mm offset at rear, 3mm offset at front**
Tires: X-pattern D compound 1" (26mm) wide 2.5" (64mm) outer diameter
Bumpers: Front, foam**
Body: Fully trimmed and painted with rear wing and decals applied**
Battery: 1800mAh 7.2V 6-cell with standard connector, chassis also
accepts saddle pack batteries**
Charger: AC wall, charges battery in six hours**
Suspension: Fully adjustable**
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle**
Ackerman: Adjustable, Ackerman describes the effect of the inside
front wheel turning tighter than the outside front wheel**
Steering: Bell-crank type with servo saver**

INCLUDES: HPI Sprint 2 on-road Touring Car with oil-filled shocks, 17 turn
motor, Electronic Speed Control, painted body, tires, foam inserts
wheels, 28 tooth pinion gear, 87 tooth spur gear, instructions, 2-
channel radio, 1800mAh battery pack, AC wall charger, 2 and 3° rear
toe-in blocks, 4 and 6° front caster blocks, Sprint 2 decal sheet**

REQUIRES: AA batteries: 8 for transmitter**

Length: 17" (431mm)/
Width: 7.5" (190mm)/
Height: 5" (127mm)/
Weight: 3.1lbs (1425g) ready-to-run/
Wheelbase: 10" (254mm)/
Front Tread: 6.5" (166mm)/
Rear Tread: 6.9" (175mm) side-to-side at wheel centers/
Front Track: 7.3" (186mm)/
Rear Track: 7.75" (197mm)/
Ground Clearance: 0.41" (10.5mm)/
Gear Ratio: 6.62:1/
Tires- Front and Rear: 1" x 2.5" (26mm x 64mm)/
Length: 17" (432mm)/
Width: 8.2" (208mm) at rear wheels (widest point)/
7.25" (184mm) ahead of front wheels (thinnest point)/
Height: 3.5" (89mm)

Add to Cart:

  • Model: HPI1707
  • Shipping Weight: 8lbs
  • 1 Units in Stock
  • Manufactured by: HPI Racing

This product was added to our catalog on Saturday 09 June, 2007.

   requests since   

Copyright © 2018 Hobby Club. Maintained by Nlinksolution