Bantam e-Station Two-Meter
TWO-METER is a very sophisticated electronic device that controlled by high performance
microprocessor and precise resistors.
It has three functions of ‘watt-meter’, ‘battery checker’ and
Those functions are essential for electric flyers to ensure safe battery condition and to
measure the electric consumptions of the power system.
And also, the built-in self-balancer can
equalize the individual voltages instantly.
TWO-METER can handle all types of Lithium batteries(LiPo, LiIo, LiFe) consisting of serial-wired cells,
but the battery pack has to have a balancing plug for checking voltages.
The Watt-meter circuit can measure the electric current up to 100A.
You can verify the electric
consumptions on your power system.
You can drive the ESC without radio and receiver, using integrated signal generator.
TWO-METER can show you the voltage and residual capacity of your Lithium battery pack with its
individual voltage of each cells.
TWO-METER has an integrated self-balancing circuit which is self-operative without linking to charger.
When you connect the battery pack to the individual port of the device the balancing job will be started
In this case the individual cell voltages will be equalised to the lowest cell voltage of the
Servo Drive / Test:
TWO-METER has a integrated signal generator to drive the servo.
In 'Watt' menu, you can control the
servo by increments or decrements of signal.
To drive the servo, a battery pack of 4.8V is necessary in
connection of Y-harness.
Input Power max. 60V
Max. current (Watt-meter) 100A
Min. operating voltage 7.2V
Power consumption (Battery checker) approx. 20mA
Battery checker 2~6S LiXX
Servo Driver 900 ~ 1500 ~ 2100 us
ESC Driver Opto / BEC, manual drive
Dimension 110x60x23 mm