Categories
CO2 & Rubber Powered Products (22)
Simulators-Telemetry-OnBoard Dat-> (4)
Airplanes/Gliders-> (232)
  Airplanes Large Scale (10)
  Control Line Models (1)
  Glider Parts & Accessories (49)
  Gliders-1/32 & 1/48 Scale (2)
  Gliders-Electro (14)
  Hand Launch Gliders (HLG) (7)
  Jets-Electro (7)
  U.A.V.'s (9)
  3D,Slow & Park Flyers-> (27)
  Gliders-Competition (14)
  Gliders, Scale & Sport (28)
  R/C Airplanes, Scale & Sport (28)
  Free Flight (19)
  F/F or R/C Assisted (12)
  Old Timers (5)
Helicopters-> (29)
Cars-> (29)
Boats-> (9)
R/C Systems-> (203)
Engines-> (217)
Electric Motors & EDF units-> (91)
Electric Components-> (90)
Tools, Glues, Etc.-> (20)
Props, Parts & Accessories-> (85)
Manufacturers
What's New?
Carbon Pushrod - Micro 0.019 x 48"
Carbon Pushrod - Micro 0.019 x 48"
$3.20
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Savex Me-110 ARF R/C Scale
[HMOSXME110]
$499.95 $379.95

Specifications:

* Scale: 1:11,3
* Wingspan: 1440 mm
* Length: 1050 mm
* Weight: 800 g
* Sugg. power: 2x 1,5 - 2,5 ccm gas
Electro 2x outrunners or inrunners

The scale model of battle airplane produced by GFK - CFK technology. (glass and carbon strings). Very fine integrated hinges at all rudders. Powered by glow or electric engines. Can be used without engine like slope soarer (PSS). Standard supplied in two colour scheme. Maximum detailed as Museum quality, metal sheets. cloth a.t.c.

Recommended motor is MEGA ac-22-10-8z direct driving configuration, two regulator JETI 3P-18, one regulator must be switched on, the second one switched off. Regulators are connected in parallel to one battery-pack 10 cells Sanyo RC-4/5 SC - 1600mAh. It is also possible to use 8 cells, but with 10 there is more power, Me - 110 becomes real heavy bomber.

Suggested propellers are 8.5x6"

With 10 cells battery you can safely throw it "from hand", there is enough power to overcome eventual crisis. If you plan to always start from hand only, you can make it a bit safer when you use prop 8.5x5" instead of 6". This will improve the static initial thrust during take off, but model will become little bit slower.
The other option are HACKER B 20 18L , with 3:1 gearbox, the remaining accessory is the same as for version with MEGA.
We suggest motors to be mounted on fiberglass plates with thickness 1.5 mm (not less in any case!). Insert them from upper side of nacelles, through 40x50 mm opening which is already drawn there. Do not use propeller spindles with diameter more than 10 mm, because propellers are normally available only for diameters less than 8 mm. Do not glue the elevator mounts, otherwise it may be difficult to align them properly.
You can put plywood plate approximately 20 mm over the wing for battery. Usually it is sufficient to fix the battery by velcro type tape on it. For flying at lower speeds, it is better to lift the trailing edge of ailerons by 1 mm over neutral position. Ailerons should move from 0 to +8 mm. No negative aileron deflection is recommended! Use it only when you want to fly more acrobatics at higher speeds, and activate it by fly-mode switch.

This product was added to our catalog on Sunday 03 June, 2007.
Reviews
Shopping Cart
0 items
Manufacturer Info
Savex GFK Modell
Other products
Notifications
NotificationsNotify me of updates to Savex Me-110 ARF R/C Scale
Tell A Friend
 
Tell someone you know about this product.
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Contact Us
PayPal